Basic Information

BrandAudi
SeriesQ2L
Year2022
First Registration2022/08
Mileage4.63km
Transfer Count1times
FuelGasoline
TransmissionDCT
Engine1.4T 150 L4
ColorWhite
Seats-

Condition Description

[Regarding the discrepancy between the vehicle's nameplate date and registration certificate date] When the vehicle is assembled on the production line, a nameplate is affixed, and the date on the nameplate at this stage is the production date. After the vehicle leaves the production line, it undergoes various tests, and only after passing these tests is a certificate of conformity issued. The date on this certificate is the actual manufacturing date, hence the time difference (the vehicle information on the official national website is consistent). The headlight date is before the manufacturing date on the registration certificate. The operating time of the left and right headlights was read as 1517h and 1518h respectively. Based on the overall vehicle condition and the headlight operating time, it is determined that the left and right headlights were replaced during quality inspection before leaving the factory, and were not replaced after leaving the factory. Vehicle Identification Number: LFV2B2GA1M5487823 Vehicle Condition (for reference only): Full vehicle covered with car cover Left rear fender sheet metal and paint work, slight deformation of the left rear fender inner frame, adjustment marks on the left and right headlight screws, and slight damage to the lower skid plate clips on the radiator support (presumably damaged during previous maintenance). Selling points: Good color, good condition, low fuel consumption New car price: Over 140,000 RMB Used car price: Over 100,000 RMB Documents: 1 key, license plate on the vehicle Number of ownership transfers: 1 Insurance and inspection expiration dates: Insurance expired, inspection date 26.8 Inspector: Yang Haomin Departed on [Date] [Mileage] [Date] Arrived at [Date] Mechanic (km) Full Vehicle Inspection: 1. Engine oil remaining (0 km), requires maintenance. 2. Battery tested (50%), requires attention. 3. Brake fluid (normal). 4. Antifreeze (normal). 5. Front brake pad thickness (normal). 6. Chassis components (no scratches). 7. Engine and transmission (no oil stains). 8. Four tires inspected (normal). 9. Mileage read (normal). Maintenance: 1. Full wash None 2. Paintwork preparation: None 3. Mechanical repair preparation: None 4. To be prepared: None Vehicle Re-inspection Form Vehicle Name: Audi Q2L Vehicle Identification Number: 487823 Paint Finish: Left rear fender bodywork and paint, front and rear bumper paint Condition: Minor scratches on the windshield; minor scratches on the chassis; left and right headlights dated after the vehicle's production date but before the manufacturing date, indicating original factory replacement; minor deformation of the inner frame of the left rear fender; the entire vehicle is covered with a protective film; specific paint finish and scratches will be confirmed after the film is removed; wheel rim scratches. See inspection report for details. Actual vehicle condition is based on the recorded information, supplemented by actual inspection. Re-inspection completed on December 27th; vehicle condition confirmed (tracing completed). Warranty period is three years or 100,000 kilometers.

Configuration Highlights

Driver/Passenger Airbags
Front/Rear Side Airbags
Front/Rear Curtain Airbags
Tire Pressure Monitoring
ISOFIX Child Seat Anchors
ABS Anti-lock Braking
Electronic Brake Distribution
Electronic Stability Control
Hill Start Assist
Auto Hold
Multifunction Steering Wheel
Paddle Shifters
Front Parking Sensors
Seat Material
Driver/Passenger Power Seats
Rear Cupholders
Low Beam Headlights
Daytime Running Lights
Auto Headlights
Adjustable Headlight Height
Power Windows
Anti-pinch Windows
Climate Control Type
Start-Stop System
Active Safety System

Q&A

More

If a car frequently transfers between extremely cold areas (like Northeast China) and extremely hot areas (like Hainan), would you provide special risk warnings?

Absolutely. The extreme temperature fluctuations will significantly accelerate the aging of chassis rubber parts, oil seals, and interior plastics. For vehicles frequently dispatched across such latitudes, we will conduct fatigue resistance checks on chassis rubber parts that are twice as stringent as those for vehicles in temperate regions.

How to ensure compliance for countries that strictly prohibit the import of vehicles containing any asbestos (like Australia)?

Chinese passenger cars produced after 2005 have fully transitioned to asbestos-free brake pads, clutch plates, and gaskets. However, for export to countries with strict regulations, buyers must pay for sampling and testing by a NATA-accredited laboratory before shipment, and obtain an asbestos-free certificate.

How do you assess the appearance condition of a vehicle? What specific standards are there for scratches and dents?

We use quantitative standards. Minor scratches less than 3 cm that do not reach the base coat (which can be polished) are considered normal wear; scratches over 3 cm deep to the base coat or dents larger than 2 cm in diameter will be highlighted in the inspection report's "Appearance Defect Distribution Map" with close-up photos.