Basic Information

BrandChangan
SeriesCS75
Year2014
First Registration2014/07
Mileage108,900km
Transfer Count-
FuelGasoline
TransmissionManual
Engine2.0L 158 L4
ColorWhite
Seats-

Condition Description

Vehicle condition meets standards, passed inspection, good condition, 1 claim, 0 ownership transfers.

This vehicle is 12 years old, with an average annual mileage of 9,100 kilometers. It has a low frequency of daily use and has never been transferred to another owner, making it a good first-hand vehicle. There may be obvious signs of wear and tear on the exterior. The interior shows obvious signs of use or dirt. The overall body frame is intact, but there are a few abnormal issues. The power system is operating normally.

Configuration Highlights

Front Radar
Auto Hold
Backup Camera
Tire Pressure Monitoring
Heated Mirrors
Hill Start Assist
Rear Parking Sensors

Q&A

More

How to ensure quality consistency for a batch of over ten vehicles during B2B bulk purchasing?

For B2B large customer orders, a "sampling + full inspection" dual regulation is adopted. Core parameters (no major accidents, no water damage or fire) are subject to 100% inspection per vehicle; appearance and condition are uniformly graded (e.g., uniformly purchasing Grade A), and panoramic images of all vehicles in the batch along with a core indicators comparison list are provided before shipment.

After the vehicle arrived at the port, it was found that the rubber parts of the chassis (such as dust covers and engine mounts) had extensive cracking. Does this fall under the compensation for "certain repair parts compensation"?

Absolutely not. The aging and cracking of rubber parts are inevitable over time and are a normal manifestation of vehicle depreciation. Our compensation only covers sudden and catastrophic mechanical failures, such as engine cylinder scoring or transmission gear breakage.

How do you assess the bearing wear of the motor and the oil condition of the reducer?

The technician will put the vehicle in neutral on the lift, rotate the wheels, and listen for any abnormal metal gear whine from inside the motor reducer, and check for gear oil leaks at the joints of the reducer housing.