Affordable commuter car 【Vehicle Body Parts】 Replacement: Headlights Painting: Front and rear bumpers, right A-pillar cover, right top edge beam, right C-pillar cover, rear hood, left rear door, left C-pillar cover, left top edge beam, left A-pillar cover, left side panel, hood Sheet Metal: Left front fender, right front fender, right front door, right side panel, right rear door, right rear fender, left rear door, left front door 【Vehicle Structural Components】Intact, undamaged. 【Vehicle Powertrain】In good working condition, no major repairs, gear shifting normal. [Water Blister] None, [Fire Damage] None Special Notes: Slight deformation of both front inner panels, slight deformation of the inner side of both front A-pillars, sheet metal repair of the right rear inner panel, deformation of the left rear inner panel, rear wiper not spraying water, engine and transmission oil leaks, valve cover removal, windshield crack, wheel rims repainted, slight idling vibration. Contract Remarks: Based on the instrument display, actual display is not guaranteed. Re-inspector: Yin Guicai
We use two steps: 1. Insert a medical-grade endoscope through the spark plug hole to visually inspect cylinder wall scratches and carbon buildup on the piston top; 2. Extract an engine oil sample to check for large metal debris or emulsification (caused by coolant leakage).
We will use a megohmmeter (insulation resistance tester) to measure the insulation resistance of the high-voltage bus. If the resistance value is below the national safety standard, it indicates a risk of leakage, and the vehicle will be deemed unqualified.
We cannot open each tire to inspect the inside. However, if a visual inspection reveals severe creases on the tire sidewall, it indicates that the run-flat tire has been driven for a long time at zero pressure, damaging its internal structure. We would recommend replacing it before shipping.
