Basic Information

BrandAudi
SeriesS7
Year2015
First Registration2015/10
Mileage29,000km
Transfer Count-
FuelGasoline
TransmissionDCT
Engine4.0T 420 V8
ColorBlue
Seats-

Condition Description

very good

Original paint and exterior condition: Paintwork is well-maintained, body structure has not been repaired, and there have been no major accidents. Interior: Clean and tidy. Safety indicator lights are normal, airbags and other passive safety features are functioning properly, vehicle electronics are in good working order, and all static and dynamic equipment is complete. Driving experience: Ignition, starting, acceleration, cornering, deceleration, and braking are all problem-free; acceleration is rapid, power output is smooth and comfortable, and there is no idling vibration.

0 transfers

Configuration Highlights

✓ISOFIX Child Seat Anchors
✓Auto Hold
✓Auto Park Assist
✓Power Trunk
✓Keyless Start System
✓Paddle Shifters
✓Head-Up Display
✓Bluetooth/Hands-free
✓Cornering Lights
✓Rear Independent Climate Control
✓Rear Air Vents

Accident & Maintenance Records

Accident Record

🔗 Open Link

Maintenance Record

🔗 Open Link

Document Information

Inspection Expiry Date2025/10
Warranty Expiry Date-
Insurance Expiry Date2025/10

Q&A

More

How to confirm that the car windows are all original factory parts and not replaced due to an accident?

The technician will check the production date codes and brand logos in the lower left corner of all the car's glass (including the windshield, four doors, and rear window) to see if they match the vehicle's factory date on the nameplate. If any glass is found to have a date later than the vehicle's production date, it will be recorded as evidence of a "previous damage replacement."

How can I judge the real mechanical condition of a used car from China without seeing it in person?

Remote mechanical assessment relies on documented evidence: 1. Cold-start video: Ask for a video of the engine starting from cold — listen for rattles, watch for smoke (blue = oil burning, white = possible head gasket issue). 2. OBD scan: A full diagnostic scan reveals fault codes in the engine, gearbox, and electronics. Request the raw scan report, not a screenshot summary. 3. Service records: Cross-check mileage against maintenance records and inspection stickers; consistent records indicate a cared-for car. 4. Fluid check: Photos of the oil dipstick and coolant color tell a lot — milky oil or rusty coolant are red flags. 5. Test drive video: A short drive video shows gear shifts, braking, and steering behavior. Combine these with the pre-shipment inspection report. A seller who refuses to provide cold-start video or OBD data is a warning sign.

If a third-party inspection report misses significant technical defects and they are discovered upon arrival at the destination port, how is liability determined?

This is a key legal issue. If the inspection is conducted by a third party appointed by us, we will be the primary responsible party and provide limited compensation to you, after which we will seek reimbursement from the inspection agency; if the inspection agency is designated by you personally (such as SGS), you will need to file a claim directly with that agency according to its service terms.

Audi S7 4.0T 420 V8

奥迪S7 2013款 4.0 TFSI quattro

EXW: $50,758
Car CodeSWA1464885
Publish Date2025/09/15