The exterior paint is well-maintained; the body structure shows no signs of repair or major accidents. The interior is clean and tidy. Safety indicator lights are normal; passive safety features such as airbags are in good working order; all electronic components are functioning properly; and both static and dynamic equipment are complete. Driving the vehicle is smooth and efficient, with no issues with ignition, starting, acceleration, cornering, deceleration, or braking. Acceleration is rapid, and power output is smooth and comfortable, with no idling vibration. Overall, the vehicle's condition is fair. The body frame structure shows no deformation or twisting, and there are no signs of fire or water damage. There are signs of repainting, but the overall paint is in good condition, ruling out major accidents. It offers good visibility, a spacious, bright, and well-ventilated interior, making it suitable for family use.
The headliner is considered an "irreversible interior component." If the edges are delaminated or there are deep, hard-to-clean dark water stains, it will directly lead to a downgrade in the interior grade, even if it does not affect driving. We will not use pins or low-quality glue for cosmetic repairs.
A proper inspection relies on equipment, not just eyes. The inspector should use a paint thickness gauge to measure 50-60 points across body panels; original paint is typically 80-150 microns. An OBD diagnostic scanner reads stored and pending fault codes across all control units, and for EVs it also reads battery state of health and charge cycle counts. The car must go on a lift for the underbody check: frame rails, suspension components, oil leaks and accident repair marks are only visible from below. A battery tester checks starting voltage and charging system health, and a tread depth gauge documents tire condition. Ask for the report to include raw readings and dated photos rather than a simple pass/fail summary - that is what makes it verifiable.
The catalytic converter contains precious metals, making it a target for theft. During chassis inspection, we check if the welding points of the catalytic converter are in their original state. Once verified, the vehicle will be sealed after being handed over to port logistics to prevent disassembly and resale.
